The textile industry uses a wide variety of chemicals. From raw fibers to the fabric we wear, specific chemicals are involved at each stage of the process. We can broadly categorize these chemicals into four main types based on the production process:
1. Pre-treatment Auxiliaries: This is the "base layer" stage of fabric preparation. Its purpose is to remove natural impurities, greases, or sizing agents added during weaving from the fibers, making the fabric whiter and more absorbent.
Scouring Agents: Primarily surfactants, used to wash away greases and waxes from the fibers.
Bleaching Agents: The most commonly used is hydrogen peroxide, used to remove natural pigments from the fibers, whitening the fabric.
Mercerizing Agents: Usually using caustic soda (NaOH), to give cotton fibers a sheen and increase their strength.
2. Dyeing & Printing Auxiliaries: This is the stage where the fabric is "dyed." Besides the pigments themselves, chemicals are needed to help with even coloring.
Dyes/Pigments: Depending on the material (e.g., cotton, polyester, nylon), reactive dyes, disperse dyes, etc., are used.
Leveling Agents: Help the dye distribute evenly on the fabric, preventing color spots.
Fixing Agents: Used after dyeing, their purpose is to "lock" the color in the fibers, preventing fading during washing.
3. Finishing: This is the final stage that gives the fabric "special functions" or "feel," and is key to increasing the product's added value.
Softeners: Make the fabric feel fluffier and smoother.
Water Repellents/Oil Repellents: Used on functional outerwear (such as Gore-Tex products), causing water droplets to bead up and roll off the fabric.
Anti-wrinkle agents: Commonly used on shirts to reduce wrinkles after washing.
Functional processing: Includes antibacterial agents, UV-cut agents, flame retardants, etc.
4. Other general-purpose chemicals
Throughout the process, some basic environmental control chemicals are also used:
pH adjusters: Such as acetic acid or soda ash, used to control the pH value of the dye bath.
Chlorinating agents: Used to treat metal ions in the water to prevent them from affecting the brightness of the dye.
