Copper Cladding (CCL) is a core upstream material in PCB manufacturing. Simply put, it's like a "sandwich": a layer of resin-impregnated fiberglass cloth (or paper) in the middle, with copper foil pressed onto both sides.
In manufacturing this "sandwich," chemicals are primarily used to mix the resin varnish. We can categorize these into four main types:
1. Matrix Resins — The Skeleton of the Substrate
The resin determines the substrate's heat resistance, insulation, and signal transmission speed.
Epoxy Resin: The most common material (such as standard FR-4 board), providing excellent mechanical strength and adhesion.
Specialty High-End Resins: To meet the high-speed transmission requirements of 5G or AI, PPO/PPE (polyphenylene oxide), PTFE (polytetrafluoroethylene), BMI (bismaleimide resin), BCB (benzocyclobutene resin), BVPE, or BT resins are used. These materials have extremely low dielectric constants (Dk) and losses (Df).
Polyimide: Primarily used in flexible printed circuit boards (FPCs), it possesses excellent heat resistance and flexibility.
2. Curing Agents & Accelerators — The Engine of the Reaction
These chemicals are responsible for causing the liquid resin to undergo a cross-linking reaction during high-temperature pressing, transforming it into a rigid solid.
Hardeners: Dicy (dicyandiamide) is traditionally used; however, in lead-free processes or for high heat resistance requirements, PN (phenolic resin-type hardener) or SMA (styrene-maleic anhydride copolymer) are used instead; to cope with the high-speed transmission of 5G or AI, TAIC (trimethylene isocyanate) is used.
Accelerators: Imidazoles, for example, only need to be added in trace amounts to control the speed and degree of resin curing.
3. Functional Fillers & Flame Retardants — Performance Enhancement
To make the board more stable and safer, these powdered or liquid formulations must be added.
Inorganic Fillers: The most commonly used is silicon dioxide (SiO2) powder. It can reduce the coefficient of thermal expansion (CTE), prevent the board from deforming when heated, and also improve heat dissipation.
Flame Retardants: * Halogen-based: Traditionally uses brominated epoxy resins, offering good flame retardant performance.
Halogen-free: Currently the mainstream, using phosphorus or nitrogen-based flame retardants to meet green environmental regulations.
Toughening Agents: Liquid Rubber, SEBS (Styrene-Ethylene/Butene-Styrene Block Copolymer).
4. Solvents & Additives — Process Lubricants
Solvents: Used to dissolve resins and various additives, forming a uniform liquid fluff. Commonly used are MEK (Methyl Ethyl Ketone), Acetone, or PM (Propylene Glycol Methyl Ether).
Silane Coupling Agents: This is very important! It's the "glue in the glue," responsible for strengthening the bond between the resin and the fiberglass cloth, two materials with different properties, preventing delamination.
Wetting and dispersing agents: ensure that the filler powder can be uniformly suspended in the resin and will not clump or precipitate.
