While the paper industry primarily uses fibers (such as wood pulp and recycled paper), the chemicals behind transforming these fibers into smooth, strong, and ink-resistant sheets of paper play a crucial role. These chemicals can be categorized into four main types based on their timing of addition:
1. Pulping & Bleaching Chemicals
This stage involves converting wood into pulp, focusing on separating fibers and removing impurities.
Cooking Chemicals: Such as caustic soda (NaOH) and sodium sulfide, used to dissolve lignin in the wood, allowing the fibers to separate.
Bleaching Agents: To whiten the paper, hydrogen peroxide ($H2O2), chlorine dioxide, or ozone are used.
Deinking Agents: If recycled paper is used, deinking agents (surfactants) are needed to wash printing ink off the fibers.
2. Wet-End Chemicals
These are chemicals added to the pulp in an aqueous solution before it enters the paper machine, aiming to adjust the paper's basic properties.
Sizing Agents: This is the most critical component, such as AKD (alkyl ketene dimer) or ASA. They increase the paper's water resistance, preventing ink from smudging.
Fillers: Such as calcium carbonate (CaCO3) or kaolin, they fill the gaps between fibers, making the paper smoother, whiter, and opaque.
Retention and Filtering Aids: Usually high-molecular-weight polymers (such as PAM polyacrylamide), they act like glue, "holding" fine fibers and fillers onto the web, reducing raw material loss.
Dry/Wet Strength Agents: Increase the strength of paper after drying or wetting (essential for toilet paper or cardboard).
3. Surface Sizing & Coating Chemicals: After the paper is initially formed, a layer of coating is applied to enhance its texture.
Surface Sizing Starch: Primarily modified starch, used to increase the surface strength of the paper and prevent dusting.
Coating Pigments and Adhesives: To achieve the glossy finish of coated paper, kaolin or calcium carbonate is applied, and latex is used as an adhesive to hold the powder in place.
Coating Chemicals: Resin coatings are used to make the paper surface waterproof (cob), oil-resistant (kit), and heat-sealable, replacing traditional PP/PE lamination processes, enabling the paper to be recycled or biodegradable.
4. Process Chemicals and Water Treatment: These chemicals are "maintenance products" used to keep the production line running smoothly.
Defoamers: Prevent excessive foaming of the pulp during mixing, which can affect paper uniformity.
Biocides: The pulp environment is humid and nutrient-rich, making it prone to mold or bacteria growth (producing bio-sludge). Biocides are needed to prevent pipe blockage.
Wastewater Treatment Chemicals: Such as coagulants and flocculants, used to purify wastewater generated during papermaking to meet environmental emission standards.
